Designed to fit the Atlas N SD60, SD60M & SD50!

Decoder Features:
• Easy Install Decoder. LocoMotion:
• Torque Compensation, Switch Spd, Super Sonic.
• Scaleable Speed Stabalization.
• Transponding.

Current Rating:
• 1.5 Amp (2.0 Amps Peak)

Size:
• 0.5485” x 2.2165 w/o LEDs x .1015” (13.99mm x 56.30mm x 2.5mm)

Installation:
• Board replacement decoder

Function Outputs:
• 6-500mA

Function Type:
• Digitrax uses sophisticated algorithms to simulate truly prototypical lighting in your locomotives. With Digitrax Real FX you will think you are looking at the real thing!
• Digitrax Real FX decoders incorporate user configurable, independent special effects generators for prototypical special lighting effects.
• Set up a Mars light with just one lead.
• Use three Real FX functions to make your ditch lights be on when the engine is running and then flash alternately when the horn is “sounded” as you approach the grade crossing with a "hold-over" period after the horn blast ends. Now THAT’S PROTOTYPICAL!
• Use two Real FX functions to put realistic firebox flicker in your steam locos!
• Gyra lights, single and double pulse strobes, strato lights (rotating beacon), Rule 17 dimming are also available. FX effects are fully user configurable, you set up blink rates and periods to get just the look you want.
• Fx³ -all function outputs incorporate FX generators for prototypical lighting effects and have qualifiers for FX³ effects and qualifiers for standard on/off functions. FX³ decoders offer full function re-mapping so you can choose which function controls each function lead. FX³ decoders offer qualifiers for FX function operation qualified by one of the following: the loco’s direction of travel, whether F0 is on or off, loco direction and F0, or whether the loco is moving or not. These qualifiers are also available on function outputs that are used as standard on/off functions.